CNC BOOKSTORE

CNC MACHINE DISCOUNT BOOKS

BOOSTORE PRICELIST - CONTACT US FOR ADDITIONAL INFORMATION

NYDISTRIBUTING:   Phone: (516) 302 - 1203      email: sales@nydistributing.com

www.uofcnc.com CNC UNIVERSITY BOOKSTORE

Advanced Engineering Mathematics, Fourth Edition 
$64.50
K.A. Stroud and D.J. Booth
1280 pages, Illustrated, 7 x 10
Published: April, 2003
ISBN (0-8311-)3169-1

Advanced Metalcutting Calculators & Engineering Formulas for Metalcutting, CD and Book Combo 
$89.95
Edmund Isakov
212 pages, Illustrated, 5 x 7
Published: June, 2005
ISBN (0-8311-)3212-4

Advanced Metalcutting Calculators CD 
$74.95
Edmund Isakov
pages, Illustrated,
Published: June, 2005
ISBN (0-8311-)3211-6

An Introduction to CNC Machining and Programming 
$35.95
David Gibbs and Tom Crandell
544 pages, Illustrated, 6 x 9
Published: January, 1991
ISBN (0-8311-)3009-1

An Introduction to Measuration and Calibration 
$30.50
Paul Campbell
208 pages, Illustrated, 6 x 9
Published: January, 1995
ISBN (0-8311-)3060-1

An Introduction to Project Planning, Second Edition 
$17.50
Jack Gido
155 pages, Illustrated, 6 x 9
Published: January, 1985
ISBN (0-8311-)1160-7

Application of Metal Cutting Theory 
$21.50 $19.50
Fryderyk E. Gorczyca
275 pages, Illustrated, 6 x 9
Published: January, 1987
ISBN (0-8311-)1176-3

Applied CATIA V.5 
$38.50
L. Scott Hansen, Ph.D.
450 pages, Illustrated, 8 1/2 x 11
Due Out: September, 2006
ISBN (0-8311-)3313-9

Applied Inventor 
$34.95
L. Scott Hansen, Ph.D.
400 pages, Illustrated, 8.5 x 11
Due Out: May, 2006
ISBN (0-8311-)3291-4

Applied Solidworks 
$34.95
L. Scott Hansen, Ph.D.
400 pages, Illustrated, 8.5 x 11
Due Out: May, 2006
ISBN (0-8311-)3292-2

Appraising Management Performance: The Bubble Management Approach 
$49.95
Eugene C. Moncrief and Kevin M. Curran
352 pages, Illustrated, 6 x 9
Due Out: May, 2006
ISBN (0-8311-)3279-5

Assembly Automation: A Management Handbook, Second Edition 
$55.00
Frank J. Riley
320 pages, Illustrated, 7 x 10
Published: January, 1996
ISBN (0-8311-)3041-5

Asset Maintenance Management: A Guide to Developing Strategy and Improving Performance 
$62.50
Alan Wilson
824 pages, Illustrated, 7 x 10
Published: May, 2002
ISBN (0-8311-)3153-5

AutoCAD Pocket Reference 
$19.95
Cheryl R. Shrock
304 pages, Illustrated, 5 x 7
Published: 2006
ISBN (0-8311-)3263-9

Automating The Welding Process 
$44.95
James Berge
220 pages, Illustrated, 6 x 9
Published: January, 1994
ISBN (0-8311-)3051-2

Basic Fixture Design 
$34.95
Paul Campbell
170 pages, Illustrated, 8 x 10
Published: January, 1994
ISBN (0-8311-)3052-0

Basic Industrial Electricity: A Training and Maintenance Manual 
$42.50
Kenneth G. Oliver
384 pages, Illustrated, 8 x 10
Published: January, 1990
ISBN (0-8311-)3006-7

Basic Machining Reference Handbook, Second Edition 
$39.95
Arthur R. Meyers and Thomas Slattery
318 pages, Illustrated, 6 x 9
Published: March, 2001
ISBN (0-8311-)3120-9

Benchmarking Best Practices In Maintenance Management 
$44.95
Terry Wireman
228 pages, Illustrated, 6 x 9
Published: September, 2003
ISBN (0-8311-)3168-3

Benchmarking Best Practices In Maintenance Management, Book and CD-ROM Combo 
$67.50
Terry Wireman
228 pages, Illustrated, 6 x 9
Published: February, 2005
ISBN (0-8311-)3232-9

Benchmarking Best Practices In Maintenance Management, eBook on CD 
$44.95
Terry Wireman
228 pages, Illustrated,
Published: February, 2005
ISBN (0-8311-)3218-3

Blueprint Reading Basics, Spanish-Language Edition 
$24.95
Warren Hammer and Louis Ricardo, translator
164 pages, Illustrated, 8 x 10
Published: June, 2000
ISBN (0-8311-)3126-8

Blueprint Reading Basics, Third Edition 
$29.95
Warren Hammer
336 pages, Illustrated, 8 x 10
Published: June, 2001
ISBN (0-8311-)3125-X

CAD Systems in Mechanical and Production Engineering 
$22.50
Peter Ingham
180 pages, Illustrated, 6 x 9
Published: January, 1990
ISBN (0-8311-)3008-3

CAM Design and Manufacturing Handbook 
$89.95
Robert L. Norton, P.E.
640 pages, Illustrated, 7 3/8 x 9 1/4
Published: May, 2001
ISBN (0-8311-)3122-5

CAM Design and Manufacturing Handbook, Book and CD-ROM Combo 
$135.00
Robert L. Norton, P.E.
640 pages, Illustrated, 7 3/8 x 9 1/4
Published: February, 2005
ISBN (0-8311-)3234-5

CAM Design and Manufacturing Handbook, eBook Edition 
$89.95
Robert L. Norton, P.E.
640 pages, Illustrated,
Published: February, 2005
ISBN (0-8311-)3219-1

CNC Machining Handbook: Basic Theory, Production Data, and Machining Procedure 
$54.95
James Madison
396 pages, Illustrated, 6 x 9
Published: January, 1996
ISBN (0-8311-)3064-4

CNC Programming Basics: A Primer for Skills/VICA Championships 
FREE
Steve Krar and Arthur Gill
50 pages, Illustrated, 6 x 9
Published: April, 1999
ISBN (0-8311-)3131-4

CNC Programming Handbook, Second Edition 
$69.95
Peter Smid
600 pages, Illustrated, 7 x 10
Published: January, 2003
ISBN (0-8311-)3158-6

CNC Programming Handbook, Second Edition, Book and eBook Combo 
$105.00
Peter Smid
pages, ,
Published: December, 2005
ISBN (0-8311-)3283-3

CNC Programming Handbook, Second Edition, ebook on CD 
$69.95
Peter Smid
pages, , CD Only
Published: December, 2005
ISBN (0-8311-)3282-5

CNC Programming Library CD 
$135.00
Peter Smid
1215 pages, Illustrated, CD Only
Published: January, 2006
ISBN (0-8311-)3305-8

CNC Programming Techniques, Book and eBook on CD Combo 
$89.92
Peter Smid
360 pages, Illustrated, 7 x 10
Published: January, 2006
ISBN (0-8311-)3304-X

CNC Programming Techniques, eBook on CD 
$59.95
Peter Smid
360 pages, Illustrated, CD only
Published: January, 2006
ISBN (0-8311-)3306-6

CNC Programming Techniques: An Insider’s Guide to Effective Methods & Applications 
$59.95
Peter Smid
448 pages, Illustrated, 7 x 10
Published: November, 2005
ISBN (0-8311-)3185-3

CNC Simplified 
$59.95
Steve Krar and Arthur Gill
448 pages, Illustrated, 7 x 10
Published: June, 2000
ISBN (0-8311-)3133-0

CNC Simplified, Lab Manual 
$16.50
Steve Krar, Arthur Gill and Peter Smid
96 pages, , 8 1/2 x 11
Published: August, 2000
ISBN (0-8311-)3147-0

Complete Guide To Predictive And Preventive Maintenance 
$42.50
Joel Levitt
256 pages, Illustrated, 6 x 9
Published: January, 2003
ISBN (0-8311-)3154-3

Complete Guide To Predictive And Preventive Maintenance, Book and eBook on CD Combo 
$63.50
Joel Levitt
256 pages, Illustrated, 6 x 9
Published: May, 2005
ISBN (0-8311-)3254-X

Complete Guide To Predictive And Preventive Maintenance, eBook on CD 
$42.50
Joel Levitt
256 pages, Illustrated,
Published: May, 2005
ISBN (0-8311-)3253-1

Complex Variables 
$36.95
K.A. Stroud and Dexter J. Booth
320 pages, Illustrated, 7 x 10
Due Out: December, 2005
ISBN (0-8311-)3266-3

Composites: A Design Guide 
$19.95 $18.00
Terry Richardson
344 pages, Illustrated, 6 x 9
Published: January, 1987
ISBN (0-8311-)1173-9

Computer Graphics Handbook 
$29.95
Michael E. Mortenson
272 pages, Illustrated, 7 x 10
Published: January, 1990
ISBN (0-8311-)1002-3

Computerized Maintenance Management Systems, Second Edition 
$42.50
Terry Wireman
202 pages, Illustrated, 8 x 10
Published: January, 1994
ISBN (0-8311-)3054-7

Computers in Manufacturing 
$22.50 $20.00
David A. Turbide
224 pages, Illustrated, 6 x 9
Published: January, 1991
ISBN (0-8311-)3033-4

Design of Industrial Ventilation Systems, Fifth Edition 
$39.95
John L. Alden and John M. Kane
280 pages, Illustrated, 6 x 9
Published: January, 1982
ISBN (0-8311-)1138-0

Developing Performance Indicators for Managing Maintenance, Book and CD Combo 
$62.95
Terry Wireman
288 pages, Illustrated, 6 x 9
Published: March, 2005
ISBN (0-8311-)3245-0

Developing Performance Indicators for Managing Maintenance, CD Only 
$41.95
Terry Wireman
288 pages, Illustrated,
Published: March, 2005
ISBN (0-8311-)3244-2

Die Design Fundamentals, Third Edition 
$39.95
Vukota Boljanovic, J.R. Paquin and R.E. Crowley
320 pages, Illustrated, 8 x 10
Published: October, 2005
ISBN (0-8311-)3119-5

Die Makers Handbook 
$27.95
Jerry Arnold
224 pages, Illustrated, 4 1/4 x 6 3/4
Published: May, 2000
ISBN (0-8311-)3132-2

Differential Equations 
$36.95
K.A. Stroud and Dexter J. Booth
416 pages, Illustrated, 7 x 10
Published: October, 2004
ISBN (0-8311-)3187-X

Dimensional Management: A Comprehensive Introduction 
$44.95
Mark Curtis
224 pages, Illustrated, 7 x 10
Published: June, 2002
ISBN (0-8311-)3073-3

Effective Maintenance Management, Book and CD-ROM PDF Combo 
$71.50
V. Narayan
246 pages, Illustrated, 6 x 9
Published: April, 2005
ISBN (0-8311-)3250-7

Effective Maintenance Management, CD-ROM PDF Only 
$47.50
V. Narayan
246 pages, Illustrated,
Published: April, 2005
ISBN (0-8311-)3249-3

Effective Maintenance Management: Risk & Reliability Strategies for Optimizing Performance 
$47.50
V. Narayan
246 pages, Illustrated, 6 x 9
Published: April, 2004
ISBN (0-8311-)3178-0

Electronics for Electricians & Engineers 
$24.95
Ian R. Sinclair
270 pages, Illustrated, 6 x 9
Published: January, 1987
ISBN (0-8311-)1000-7

Energy Reduction Through Improved Maintenance Practices 
$29.95
Ken Bannister
128 pages, , 6 x 9
Published: January, 1999
ISBN (0-8311-)3082-2

Engineered Work Measurement, Fourth Edition 
$22.50 $20.00
Delmar W. Karger and Franklin H. Bayha
503 pages, Illustrated, 6 x 9
Published: January, 1987
ISBN (0-8311-)1170-4

Engineering Coatings 
$44.00 $40.00
Stan Grainger
200 pages, Illustrated, 8 x 10
Published: January, 1992
ISBN (0-8311-)3045-8

Engineering Formulas For Metalcutting 
$24.95
Edmund Isakov
240 pages, Illustrated, 5 x 7
Published: November, 2003
ISBN (0-8311-)3174-8

Engineering Formulas for Metalcutting, Book and CD-ROM Combo 
$37.50
Edmund Isakov
240 pages, Illustrated, 5 x 7
Published: February, 2005
ISBN (0-8311-)3229-9

Engineering Formulas for Metalcutting, eBook Edition 
$24.95
Edmund Isakov
240 pages, Illustrated,
Published: February, 2005
ISBN (0-8311-)3215-9

Engineering Formulas Interactive 
$44.95
Frank Sims
402 pages, Illustrated, 5 x 7
Published: January, 1999
ISBN (0-8311-)3087-3

Engineering Mathematics Through Applications 
$62.50
Kuldeep Singh
784 pages, Illustrated, 7 x 10
Published: April, 2003
ISBN (0-8311-)3170-5

Engineering Mathematics, Fifth Edition 
$64.50
K.A. Stroud and Dexter J. Booth
1236 pages, Illustrated, 7 x 10
Published: May, 2001
ISBN (0-8311-)3152-7

Engineering Science 
$12.50
William Bolton
213 pages, Illustrated, 6 x 9
Published: January, 1990
ISBN (0-8311-)3007-5

Exercise Workbook For Advanced Autocad 2002 
$24.95
Cheryl Shrock
268 pages, Illustrated, 8.5 x 11
Published: January, 2002
ISBN (0-8311-)3197-7

Exercise Workbook For Advanced Autocad 2004 
$29.95
Cheryl Shrock
400 pages, Illustrated, 8.5 x 11
Published: January, 2004
ISBN (0-8311-)3199-3

Exercise Workbook For Advanced AutoCAD 2005 Book and eBook Combo with 30 Day AutoCAD Trial 
$52.50
Cheryl Shrock
400 pages, Illustrated, 8.5 x 11
Published: February, 2005
ISBN (0-8311-)3231-0

Exercise Workbook For Advanced AutoCAD 2005 eBook on CD with 30 Day AutoCAD Trial 
$34.95
Cheryl Shrock
400 pages, Illustrated,
Published: February, 2005
ISBN (0-8311-)3217-5

Exercise Workbook for Advanced AutoCAD 2005 Learning Bundle with 180 Day AutoCAD Student Edition 
$79.95
Cheryl Shrock
400 pages, Illustrated, 8.5 x 11
Published: January, 2005
ISBN (0-8311-)3225-6

Exercise Workbook for Advanced AutoCAD 2005 with 30 Day AutoCAD Trial 
$34.95
Cheryl Shrock
400 pages, Illustrated, 8.5 x 11
Published: October, 2004
ISBN (0-8311-)3201-9

Exercise Workbook for Advanced AutoCAD 2006 with 30-Day AutoCAD Trial 
$34.95
Cheryl R. Shrock
440 pages, Illustrated, 8.5 x 11
Published: July, 2005
ISBN (0-8311-)3214-0

Exercise Workbook for Advanced AutoCAD 2006, Book and eBook Combo with 30-Day AutoCAD Trial 
$52.50
Cheryl R. Shrock
pages, ,
Published: December, 2005
ISBN (0-8311-)3296-5

Exercise Workbook for Advanced AutoCAD 2006, eBook on CD with 30-Day AutoCAD Trial 
$34.95
Cheryl R. Shrock
pages, ,
Published: December, 2005
ISBN 0-8311-33295-7

Exercise Workbook For Beginning and Advanced AutoCAD 2005 eBook Edition with 30 Day AutoCAD Trial 
$69.90
Cheryl Shrock
400 pages, Illustrated,
Published: February, 2005
ISBN (0-8311-)3238-8

Exercise Workbook For Beginning Autocad 2002 
$29.95
Cheryl Shrock
366 pages, Illustrated, 8.5 x 11
Published: January, 2002
ISBN (0-8311-)3196-9

Exercise Workbook For Beginning Autocad 2004 
$29.95
Cheryl Shrock
400 pages, Illustrated, 8.5 x 11
Published: January, 2004
ISBN (0-8311-)3198-5

Exercise Workbook For Beginning AutoCAD 2005 Book and eBook Combo with 30 Day AutoCAD Trial 
$52.50
Cheryl Shrock
400 pages, Illustrated, 8.5 x 11
Published: February, 2005
ISBN (0-8311-)3230-2

Exercise Workbook For Beginning AutoCAD 2005 eBook on CD with 30 Day AutoCAD Trial 
$34.95
Cheryl Shrock
400 pages, Illustrated,
Published: February, 2005
ISBN (0-8311-)3216-7

Exercise Workbook for Beginning AutoCAD 2005 Learning Bundle with 180 Day AutoCAD Student Edition 
$79.95
Cheryl Shrock
400 pages, Illustrated, 8.5 x 11
Published: January, 2005
ISBN (0-8311-)3224-8

Exercise Workbook for Beginning AutoCAD 2005 with 30 Day AutoCAD Trial 
$34.95
Cheryl Shrock
400 pages, Illustrated, 8.5 x 11
Published: September, 2004
ISBN (0-8311-)3200-0

Exercise Workbook for Beginning AutoCAD 2006 with 30-Day AutoCAD Trial 
$34.95
Cheryl R. Shrock
440 pages, Illustrated, 8.5 x 11
Published: July, 2005
ISBN (0-8311-)3213-2

Exercise Workbook for Beginning AutoCAD 2006, Book and eBook Combo 
$52.50
Cheryl R. Shrock
pages, ,
Published: December, 2005
ISBN (0-8311-)3294-9

Exercise Workbook for Beginning AutoCAD 2006, eBook on CD with 30-Day AutoCAD Trial 
$34.95
Cheryl R. Shrock
pages, ,
Published: December, 2005
ISBN (0-8311-)3293-0

Exercise Workbook for Beginning AutoCAD 2006, Learning Bundle with 180 Day AutoCAD Student Edition 
$84.95
Cheryl R. Shrock
440 pages, Illustrated, 8.5' x 11'
Published: September, 2005
ISBN (0-8311-)3268-X

Exploring Advanced Manufacturing Technologies 
$54.95
Steve Krar and Art Gill
448 pages, Illustrated, 7 x 10
Published: July, 2003
ISBN (0-8311-)3150-0

Exploring Advanced Manufacturing Technologies, Book and CD-ROM Combo 
$78.95
Steve Krar and Art Gill
448 pages, Illustrated, 7 x 10
Published: February, 2005
ISBN (0-8311-)3235-3

Exploring Advanced Manufacturing Technologies, eBook on CD 
$54.95
Steve Krar and Art Gill
448 pages, Illustrated,
Published: February, 2005
ISBN (0-8311-)3220-5

Fanuc CNC Custom Macros, Book and eBook on CD Combo 
$75.00
Peter Smid
pages, ,
Published: December, 2005
ISBN (0-8311-)3285-x

FANUC CNC Custom Macros, eBook on CD Only 
$49.95
Peter Smid
pages, ,
Published: December, 2005
ISBN (0-8311-)3284-1

Fanuc CNC Custom Macros: Programming Resources for Fanuc Custom Macros B Users 
$49.95
Peter Smid
336 pages, Illustrated, 7 x 10
Published: November, 2004
ISBN (0-8311-)3157-8

Fuel Oil Manual, Fourth Edition 
$39.95
Paul F. Schmidt
240 pages, Illustrated, 6 x 9
Published: January, 1986
ISBN (0-8311-)1166-6

Fundamental Principles of Manufacturing Processes 
$38.50
Robert H. Todd and Dell K. Allen, both Brigham Young University, and LeoAlting, Technical University of Denmark
176 pages, Illustrated, 7 x 10
Published: January, 1994
ISBN (0-8311-)3050-4

Gear Design Simplified, Third Edition 
$32.95
Franklin D. Jones and Henry H. Ryffel
151 pages, Illustrated, 6 x 9
Published: January, 1961
ISBN (0-8311-)1159-3

Geometric Modeling, Third Edition 
$49.95
Michael E. Mortenson
452 pages, Illustrated, 7 x 10
Due Out: May, 2006
ISBN (0-8311-)3298-1

Grinding Technology, Second Edition 
$69.95
Stephen Malkin and Changsheng Guo
320 pages, Illustrated, 6 x 9
Due Out: October, 2006
ISBN (0-8311-)3247-7

Guide to World Screw Threads 
$34.95
P.A. Sidders
318 pages, Illustrated, 6 x 9
Published: January, 1969
ISBN (0-8311-)1092-9

Handbook of Air Conditioning, Heating, and Ventilating, Third Edition 
$99.95
Eugene Stamper and Richard Koral
1420 pages, Illustrated, 6 x 9
Published: January, 1979
ISBN (0-8311-)1124-0

Handbook of Dimensional Measurement, Third Edition 
$64.95
Francis Farago and Mark Curtis
602 pages, Illustrated, 7 x 10
Published: January, 1994
ISBN (0-8311-)3053-9

Handbook of Maintenance Management 
$59.95
Joel Levitt
477 pages, , 6 x 9
Published: January, 1997
ISBN (0-8311-)3075-X

Handbook of Manufacturing Processes 
$115.00
James Bralla
804 pages, Illustrated, 7 x 10
Due Out: August, 2006
ISBN (0-8311-)3179-9

Harvey's Electrical Code Field Guide 
$14.95
Harvey N. Holzman
160 pages, Illustrated, 4 x 6
Published: April, 2005
ISBN (0-8311-)3191-8

Hazardous Chemicals Safety & Compliance Handbook for the Metalworking Industries 
$89.95
Richard P. Pohanish and Stanley A. Greene
600 pages, Illustrated, 7 x 10
Published: November, 2005
ISBN (0-8311-)3261-2

HVAC: The Handbook of Heating, Ventilation & Air Conditioning for Design & Implementation, Fourth Edition 
$125.00
A. Vedavarz, S. Kumar and M. Hussain
1400 pages, Illustrated, 7 x 10
Published: November, 2005
ISBN (0-8311-)3163-2

Hydraulic and Pneumatic Power for Production, Fourth Edition 
$47.50
Harry L. Stewart
435 pages, Illustrated, 6 x 9
Published: January, 1977
ISBN (0-8311-)1114-3

Improving Equipment Performance:The Reliability and Maintainability of Tooling and Equipment 
$44.95
Mark A. Morris
288 pages, Illustrated, 6 x 9
Due Out: February, 2006
ISBN (0-8311-)3248-5

Improving Maintenance & Reliability Through Cultural Change 
$43.95
Stephen J. Thomas
356 pages, Illustrated, 6 x 9
Published: May, 2005
ISBN (0-8311-)3190-X

Improving Maintenance & Reliability Through Cultural Change, Book and eBook on CD Combo 
$65.95
Stephen J. Thomas
pages, ,
Published: December, 2005
ISBN (0-8311-)3289-2

Improving Maintenance and Reliability through Cultural Change Workbook 
$24.95
Stephen J. Thomas
400 pages, Illustrated, 8 1/2 x 11
Published: January, 2006
ISBN (0-8311-)3276-0

Improving Maintenance and Reliability Through Cultural Change, eBook on CD 
$43.95
Stephen J. Thomas
pages, ,
Published: December, 2005
ISBN (0-8311-)3288-4

Industrial Control Handbook 
$74.95
E.A. Parr
896 pages, Illustrated, 6 x 9
Published: January, 1999
ISBN (0-8311-)3085-7

Industrial Robotics Handbook 
$36.95
V. Daniel Hunt
432 pages, Illustrated, 6 x 9
Published: January, 1983
ISBN (0-8311-)1148-8

Ingenious Mechanisms Vol I 
$37.50
Franklin D. Jones
536 pages, Illustrated, 6 x 9
Published: January, 1930
ISBN (0-8311-)1029-5

Ingenious Mechanisms Vol II 
$37.50
Franklin D. Jones
538 pages, Illustrated, 6 x 9
Published: January, 1936
ISBN (0-8311-)1030-9

Ingenious Mechanisms Vol III 
$37.50
Holbrook L. Horton
536 pages, Illustrated, 6 x 9
Published: January, 1951
ISBN (0-8311-)1031-7

Ingenious Mechanisms Vol IV 
$37.50
John A. Newell and Holbrook L. Horton
493 pages, Illustrated, 6 x 9
Published: January, 1977
ISBN (0-8311-)1032-5

Ingenious Mechanisms, 4 Volume Set 
$135.00
Jones et al.
pages, Illustrated, 6 x 9
Published: January, 1930
ISBN (0-8311-)1084-8

Injection-Mould Design Fundamentals 
$39.95
A.B. Glanvill and E.N. Denton
294 pages, Illustrated, 5 x 7
Published: January, 1965
ISBN (0-8311-)1033-3

Inspection and Gaging, Sixth Edition 
$42.95
Clifford W. Kennedy, Edward G. Hoffman, and Steven D. Bond
654 pages, Illustrated, 6 x 9
Published: January, 1987
ISBN (0-8311-)1149-6

Inspection and Training for TPM 
$39.95
Terry Wireman
256 pages, Illustrated, 6 x 9
Published: January, 1992
ISBN (0-8311-)3042-3

Integral Logistic Structures: Developing Customer-Oriented Goods Flow 
$49.95
Sjoerd J. Hoekstra and Jac M. Romme
180 pages, Illustrated, 6 x 9
Published: January, 1992
ISBN (0-8311-)3037-7

Internet Guide for Maintenance Management 
$24.95
Joel Levitt
160 pages, , 6 x 9
Published: January, 1998
ISBN (0-8311-)3081-4

Interpretation of Geometric Dimensioning and Tolerancing 
$29.95
Daniel E. Puncochar
160 pages, Illustrated, 8 x 10
Published: January, 1997
ISBN (0-8311-)3072-5

Jig and Fixture Design Manual 
$46.95
Erik K. Henriksen
312 pages, Illustrated, 7 x 10
Published: January, 1973
ISBN (0-8311-)1098-8

Learning Mastercam V. 9 Mill Step by Step in 2D 
$59.95
James Valentino and Joseph Goldenberg
600 pages, Illustrated, 8 x 10
Published: September, 2003
ISBN (0-8311-)3177-2

Learning Mastercam X Lathe Step by Step in 2D 
$59.95
James Valentino and Joseph Goldenberg
480 pages, Illustrated, 8 x 10
Due Out: March, 2006
ISBN (0-8311-)3205-1

Learning Mastercam X Mill Step by Step in 2D 
$59.95
James Valentino and Joseph Goldenberg
600 pages, Illustrated, 8 x 10
Due Out: December, 2005
ISBN (0-8311-)3204-3

Lubrication for Industry 
$32.95
Kenneth E. Bannister
200 pages, Illustrated, 6 x 9
Published: January, 1996
ISBN (0-8311-)3061-X

Lubrication for Industry, Second Edition 
$37.50
Kenneth Bannister
256 pages, Illustrated, 6 x 9
Due Out: July, 2006
ISBN (0-8311-)3278-7

Machine Shop Practice, Second Edition, Volume I 
$27.50
Karl H. Moltrecht
496 pages, Illustrated, 6 x 9
Published: January, 1981
ISBN (0-8311-)1126-7

Machine Shop Practice, Second Edition, Volume II 
$27.50
Karl H. Moltrecht
517 pages, Illustrated, 6 x 9
Published: January, 1981
ISBN (0-8311-)1132-1

Machine Shop Trade Secrets, Book and ebook CD-ROM Combo 
$59.95
James A. Harvey
320 pages, Illustrated, 8.5 x 11
Published: May, 2005
ISBN (0-8311-)3265-5

Machine Shop Trade Secrets, ebook CD-ROM Only 
$39.95
James A. Harvey
320 pages, Illustrated,
Published: May, 2005
ISBN (0-8311-)3264-7

Machine Shop Trade Secrets: A Guide to Manufacturing Machine Shop Practices 
$39.95
James A. Harvey
320 pages, Illustrated, 8.5 x 11
Published: April, 2005
ISBN (0-8311-)3227-2

Machine Shop Training Course, Fifth Edition, Volume I 
$23.50
Franklin D. Jones
570 pages, Illustrated, 6 x 9
Published: January, 1964
ISBN (0-8311-)1039-2

Machine Shop Training Course, Fifth Edition, Volume II 
$23.50
Franklin D. Jones
566 pages, Illustrated, 6 x 9
Published: January, 1964
ISBN (0-8311-)1040-6

Machine Tool Technology Basics 
$57.50
Steve Krar, Art Gill, Peter Smid and Paul Wanner
416 pages, Illustrated, 7 x 10
Published: May, 2003
ISBN (0-8311-)3134-9

Machine Tool Technology Basics, Book and CD-ROM Combo 
$85.00
Steve Krar, Art Gill, Peter Smid and Paul Wanner
416 pages, Illustrated, 7 x 10
Published: February, 2005
ISBN (0-8311-)3233-7

Machine Tool Technology Basics, eBook on CD 
$57.50
Steve Krar, Art Gill, Peter Smid and Paul Wanner
416 pages, Illustrated,
Published: February, 2005
ISBN (0-8311-)3222-1

Machinery's Handbook 27, eBook on CD 
$89.95
McCauley, Oberg, Jones, Horton, Ryffel, Heald, and Hussain
3066 pages, Illustrated,
Published: March, 2004
ISBN (0-8311-)2777-5

Machinery's Handbook 27, eBook Edition, Upgrade 
$65.00
McCauley, Oberg, Jones, Horton, Ryffel, Heald, and Hussain
3066 pages, Illustrated,
Published: March, 2004
ISBN (0-8311-)2790-2

Machinery's Handbook 27, Large Print Book and CD-ROM 
$169.95
McCauley, Oberg, Jones, Horton, Ryffel, Heald and Hussain
2704 pages, Illustrated, 7 x 10
Published: March, 2004
ISBN (0-8311-)2737-6

Machinery's Handbook 27, Large Print Edition 
$110.00
Oberg, Jones, Horton, Ryffel, McCauley, Heald and Hussain
2704 pages, Illustrated, 7 x 10
Published: March, 2004
ISBN (0-8311-)2711-2

Machinery's Handbook 27, Toolbox Book and CD-ROM 
$152.95
McCauley, Oberg, Jones, Horton, Ryffel, Heald and Hussain
2704 pages, Illustrated, 5 x 7
Published: March, 2004
ISBN (0-8311-)2727-9

Machinery's Handbook 27, Toolbox Edition 
$89.95
Oberg, Jones, Horton, Ryffel, McCauley, Heald and Hussain
2704 pages, Illustrated, 5 x 7
Published: March, 2004
ISBN (0-8311-)2700-7

Machinery's Handbook Guide 27 
$14.50
Amiss, Jones, Ryffel, Green, McCauley, Heald and Hussain
280 pages, Illustrated, 5 x 7
Published: March, 2004
ISBN (0-8311-)2799-6

Machinery's Handbook Guide 27, Activation for use with Handbook 27 CD 
$14.50
McCauley, Heald and Hussain, Amiss, Jones, Ryffel, Green
280 pages, Illustrated, 5 x 7
Published: March, 2004
ISBN (0-8311-)2788-0

Machinery's Handbook Pocket Companion 
$19.95
Dick Pohanish and Chris McCauley
318 pages, Illustrated, 4 1/4 x 6 3/4
Published: May, 2000
ISBN (0-8311-)3089-X

Maintaining and Troubleshooting Electrical Equipment 
$27.50
Roy Parks and Terry Wireman
179 pages, Illustrated, 6 x 9
Published: January, 1987
ISBN (0-8311-)1164-X

Maintenance Management And Regulatory Compliance Strategies 
$42.50
Terry Wireman
208 pages, Illustrated, 6 x 9
Published: June, 2003
ISBN (0-8311-)3127-6

Maintenance Management And Regulatory Compliance Strategies, Book and eBook Combo 
$63.50
Terry Wireman
208 pages, Illustrated, 6 x 9
Published: February, 2005
ISBN (0-8311-)3236-1

Maintenance Management And Regulatory Compliance Strategies, eBook on CD 
$42.50
Terry Wireman
208 pages, Illustrated,
Published: February, 2005
ISBN (0-8311-)3221-3

Maintenance Management Auditing 
$49.95
Anthony Kelly
308 pages, Illustrated, 6 x 9
Published: November, 2005
ISBN (0-8311-)3267-1

Maintenance Planning, Scheduling and Coordination 
$44.95
Don Nyman and Joel Levitt
320 pages, Illustrated, 6 x 9
Published: November, 2001
ISBN (0-8311-)3143-8

Maintenance, Repair and Operations Inventory Control 
$42.95
Mark Goldstein and Joel Levitt
288 pages, Illustrated, 6 x 9
Due Out: December, 2005
ISBN (0-8311-)3192-6

Managing Factory Maintenance, Second Edition 
$44.95
Joel Levitt
320 pages, Illustrated, 6 x 9
Published: 2004
ISBN: (0-8311-) 3189-6
Managing Factory Maintenance, Second Edition, Book and ebook CD-ROM 
$67.50
Joel Levitt
320 pages, Illustrated, 6 x 9
Published: May, 2005
ISBN (0-8311-)3256-6

Managing Factory Maintenance, Second Edition, ebook CD-ROM Only 
$44.95
Joel Levitt
320 pages, Illustrated,
Published: May, 2005
ISBN (0-8311-)3255-8

Managing Maintenance Shutdowns And Outages 
$44.95
Joel Levitt
208 pages, Illustrated, 6 x 9
Published: April, 2004
ISBN (0-8311-)3173-X

Managing Maintenance Shutdowns And Outages, Book and CD 
$67.50
Joel Levitt
208 pages, Illustrated,
Published: March, 2005
ISBN (0-8311-)3243-4

Managing Maintenance Shutdowns And Outages, CD Only 
$44.95
Joel Levitt
208 pages, Illustrated,
Published: March, 2005
ISBN (0-8311-)3242-6

Manual of Gear Design (Revised) Combined Edition, Volumes 1, 2 and 3 
$49.95
Earle Buckingham & Holbrook L. Horton
pages, Illustrated, 8 x 10
Published: January, 1981
ISBN (0-8311-)3116-0

Manufacturing Processes and Materials 
$89.95
George F. Schrader and Ahmad K. Elshennawy
806 pages, Illustrated, 7 x 10
Published: September, 2000
ISBN (0-8311-)3202-7

Manufacturing Processes Reference Guide 
$54.95
Robert H. Todd and Dell K. Allen, both Brigham Young University, and LeoAlting, Technical University of Denmark
512 pages, Illustrated, 7 x 10
Published: January, 1994
ISBN (0-8311-)3049-0

Marketing Construction Services 
$27.50
Paul Pryor, CPE
136 pages, Illustrated, 6 x 9
Published: June, 2000
ISBN (0-8311-)3145-4

Mass Finishing Handbook 
$115.00
LaRoux Gillespie
800 pages, Illustrated, 8 x 10
Due Out: September, 2006
ISBN (0-8311-)3257-4

Materials Selection and Applications in Mechanical Engineering 
$74.95
Dr. Aravamudhan Raman
512 pages, Illustrated, 7 x 10
Due Out: May, 2006
ISBN (0-8311-)3287-6

Mathematical and Physical Formulas Pocket Reference 
$17.50
Vukota Boljanovic
408 pages, Illustrated, 5 x 7
Due Out: August, 2006
ISBN (0-8311-)3309-0

Mathematics at Work, Fourth Edition 
$27.50
Holbrook L. Horton, Henry H. Ryffel, Edward Messal and Bob Green
656 pages, Illustrated, 4 5/8 x 7
Published: January, 1999
ISBN (0-8311-)3083-0

Mathematics for Computer Graphics Applications, Second Edition 
$49.95
Michael E. Mortenson
416 pages, Illustrated, 7 x 10
Published: November, 1999
ISBN (0-8311-)3111-X

Mechanics of Machines, Second Edition 
$49.95
G.H. Ryder and M.D. Bennett
350 pages, Illustrated, 6 x 9
Published: January, 1990
ISBN (0-8311-)3030-X

Metal Cutting Tool Handbook, Seventh Edition 
$57.50
United States Cutting Tool Institute
795 pages, Illustrated, 6 x 9
Published: January, 1989
ISBN (0-8311-)1177-1

Metal Stamping Process 
$59.95
Jim Szumera
224 pages, Illustrated, 6 x 9
Published: January, 2003
ISBN (0-8311-)3164-0

Metering Pump Handbook 
$37.50
Robert E. McCabe, Philip G. Lanckton, and William V. Dwyer, All withPulsafeeder Division/CLEVEPAK Corporation
280 pages, Illustrated, 6 x 9
Published: January, 1984
ISBN (0-8311-)1157-7

Microbiologically Influenced Corrosion Handbook 
$79.95
Susan Watkins Borenstein
310 pages, Illustrated, 6 x 9
Published: January, 1994
ISBN (0-8311-)3056-3

Modern Manufacturing Processes 
$27.50
James Brown
256 pages, Illustrated, 4 1/4 x 6 3/4
Published: January, 1991
ISBN (0-8311-)3034-2

Overall Equipment Effectiveness (OEE)), Book and CD-ROM Combo 
$67.50
Robert C. Hansen
256 pages, Illustrated, 6 x 9
Published: February, 2005
ISBN (0-8311-)3237-X

Overall Equipment Effectiveness (OEE), eBook on CD 
$44.95
Robert C. Hansen
256 pages, Illustrated,
Published: February, 2005
ISBN (0-8311-)3226-4

Overall Equipment Effectiveness (OEE): A Powerful Production/Maintenance Tool for Increased Profits 
$44.95
Robert C. Hansen
256 pages, Illustrated, 6 x 9
Published: November, 2001
ISBN (0-8311-)3138-1

Pipe Welding Procedures, Second Edition 
$37.50
Hoobasar Rampaul
256 pages, Illustrated, 6 x 9
Published: January, 2003
ISBN (0-8311-)3141-1

Pipefitters Handbook 
$26.50
Forrest R. Lindsey
464 pages, Illustrated, 4 1/4 x 6 3/4
Published: January, 1967
ISBN (0-8311-)3019-9

Plastic Component Design 
$47.50
Paul Campbell
272 pages, Illustrated, 6 x 9
Published: January, 1996
ISBN (0-8311-)3065-2

Plastic Piping Systems, Second Edition 
$37.50
David A. Chasis
172 pages, Illustrated, 8 x 10
Published: January, 1988
ISBN (0-8311-)1181-X

Plastics Extrusion Technology Handbook, Second Edition 
$49.95
Sidney Levy and Dr. James F. Carley
398 pages, Illustrated, 6 x 9
Published: January, 1989
ISBN (0-8311-)1185-2

Practical Welding Technology 
$36.95
Rudy Mohler
220 pages, Illustrated, 6 x 9
Published: January, 1983
ISBN (0-8311-)1143-7

Preventive Maintenance 
$42.95
Terry Wireman
352 pages, Illustrated, 6 x 9
Due Out: June, 2006
ISBN (0-8311-)3300-7

Problem Solving and Process Management 
$49.95
Stephen Armstrong
408 pages, Illustrated, 6 x 9
Due Out: October, 2006
ISBN (0-8311-)3275-2

Product Design With Plastics, A Practical Manual 
$19.95 $17.25
Joseph B. Dym
288 pages, Illustrated, 6 x 9
Published: January, 1982
ISBN (0-8311-)1141-0

Production Processes 
$34.95 $30.00
Roger Bolz
1089 pages, Illustrated, 7 x 10
Published: January, 1981
ISBN (0-8311-)1088-0

Production Spare Parts, Book and eBook PDF Combo 
$67.50
Eugene C. Moncrief, Ronald M. Schroder, and Michael P. Reynolds
350 pages, illustrated, Book and CD
Published: December, 2005
ISBN (0-8311-)3281-7

Production Spare Parts, eBook CD 
$44.95
Eugene C. Moncrief, Ronald M. Schroder, and Michael P. Reynolds
350 pages, illustrated, CD Only
Published: December, 2005
ISBN (0-8311-)3280-9

Production Spare Parts: Optimizing the MRO Inventory Asset 
$44.95
Eugene C. Moncrief, Ronald M. Schroder, and Michael P. Reynolds
350 pages, illustrated, 6 x 9
Published: September, 2005
ISBN (0-8311-)3228-0

Programming of Computer Numerically Controlled Machines, Second Edition 
$39.95
Ken Evans, John Polywka and Stanley Gabrel
320 pages, Illustrated, 7 x 10
Published: June, 2001
ISBN (0-8311-)3129-2

Programming of Computer Numerically Controlled Machines: Student Workbook 
$19.95
Ken Evans
144 pages, Illustrated, 8 x 10
Published: March, 2003
ISBN (0-8311-)3162-4

Properties of Engineering Materials, Second Edition 
$43.95
R.A. Higgins
480 pages, Illustrated, 6 x 9
Published: January, 1994
ISBN (0-8311-)3055-5

Purchasing for Manufacturing 
$45.00
Harry E. Hough
208 pages, Illustrated, 6 x 9
Published: January, 1996
ISBN (0-8311-)3066-0

Quality, Reliability, and Process Improvement, Eighth Edition 
$32.50
Norbert L. Enrick
396 pages, Illustrated, 6 x 9
Published: January, 1985
ISBN (0-8311-)1125-9

Reliability for The Technologies, Updated Second Edition 
$37.50
Leonard A. Doty
307 pages, Illustrated, 6 x 9
Published: January, 1989
ISBN (0-8311-)3024-5

Reliability-Centered Maintenance 
$58.50
John Moubray
448 pages, Illustrated, 6 x 9
Published: January, 1997
ISBN (0-8311-)3146-2

Roll Form Tool Design Fundamentals 
$27.50
William Alvarez
128 pages, Illustrated, 7 x 10
Due Out: May, 2006
ISBN (0-8311-)3290-6

Setup Reduction Through Effective Workholding 
$45.00
Edward G. Hoffman for the Center for Manufacturing Systems at NewJersey Institute of Technology
256 pages, , 8 x 10
Published: January, 1996
ISBN (0-8311-)3067-9

Sheet Metal Forming Processes and Die Design 
$48.50
Vukota Boljanovic
400 pages, Illustrated, 8 x 10
Published: June, 2004
ISBN (0-8311-)3182-9

Sheet Metal Forming Processes and Die Design, Book and eBook on CD 
$73.50
Vukota Boljanovic
400 pages, Illustrated, 8 x 10
Published: May, 2005
ISBN (0-8311-)3259-0

Sheet Metal Forming Processes and Die Design, eBook on CD 
$48.50
Vukota Boljanovic
400 pages, Illustrated,
Published: May, 2005
ISBN (0-8311-)3258-2

Shop Reference for Students and Apprentices, Second Edition 
$24.95
Edward G. Hoffman and Christopher J. McCauley
544 pages, Illustrated, 4 1/2 x 6 3/4
Published: August, 2001
ISBN (0-8311-)3079-2

Statistical Process Control, Second Edition 
$48.97
Leonard A. Doty
400 pages, Illustrated, 6 x 9
Published: January, 1996
ISBN (0-8311-)3069-5

Successfully Managing Change in Organizations, Combo, User's Guide Workbook Graphics Disk 
$89.95
Steve Thomas
pages, Illustrated, 6 x 9/8 1/2 x 11
Published: November, 2002
ISBN (0-8311-)3176-5

Successfully Managing Change in Organizations: A User's Guide 
$44.95
Stephen J. Thomas
256 pages, Illustrated, 6 x 9
Published: September, 2001
ISBN (0-8311-)3149-7

Successfully Managing Change in Organizations: Graphics Disk 
$29.95
Steve Thomas
pages, Illustrated,
Published: November, 2002
ISBN (0-8311-)3161-6

Successfully Managing Change in Organizations: The Workbook 
$27.50
Steve Thomas
256 pages, Illustrated, 8 1/2 x 11
Published: November, 2002
ISBN (0-8311-)3156-X

Technical Shop Mathematics, Third Edition 
$44.95
Thomas Achatz and John G. Anderson, with contributions by Kathleen McKenzie
600 pages, Illustrated, 8 X 10
Published: November, 2005
ISBN (0-8311-)3086-5

Testing Fluid Power Components 
$49.95
Robert A Nasca
448 pages, Illustrated, 6 x 9
Published: January, 1990
ISBN (0-8311-)3002-4

The Art of Gear Fabrication 
$49.95
Prem H. Daryani
208 pages, Illustrated, 8 1/2 x 11
Published: September, 2002
ISBN (0-8311-)3142-X

The Machinist's Friend (for Windows), Version 2.0 
$45.00
Andy Knebel III
pages, ,
Published: January, 1999
ISBN (0-8311-)3110-1

The Maintenance Scorecard, eBook on CD 
$44.95
Daryl Mather
320 pages, Illustrated,
Published: April, 2005
ISBN (0-8311-)3239-6

The Maintenance Scorecard, Book and eBook Combo 
$67.50
Daryl Mather
320 pages, Illustrated, 6 x 9
Published: April, 2005
ISBN (0-8311-)3240-X

The Maintenance Scorecard:Creating Strategic Advantage 
$44.95
Daryl Mather
258 pages, Illustrated, 6 x 9
Published: March, 2005
ISBN (0-8311-)3181-0

The Tool Steel Guide 
$22.95
Jim Szumera
112 pages, Illustrated, 4 1/2 x 7
Published: June, 2003
ISBN (0-8311-)3171-3

The Valve Primer 
$32.95
Brent T. Stojkov
180 pages, Illustrated, 4 1/4 x 6 3/4
Published: January, 1997
ISBN (0-8311-)3077-6

Total Productive Maintenance, Second Edition 
$42.95
Terry Wireman
224 pages, Illustrated, 6 x 9
Published: June, 2004
ISBN (0-8311-)3172-1

Tribology in Machine Design 
$39.95 $37.50
T.A. Stolarski
352 pages, Illustrated, 7 x 10
Published: January, 1990
ISBN (0-8311-)1102-X

Value Analysis Tear-Down: A New Process for Product Development & Innovation 
$44.95
Yoshihiko Sato and J. Jerry Kaufman
176 pages, Illustrated, 6 x 9
Published: December, 2004
ISBN (0-8311-)3203-5

Vector Analysis 
$36.95
K.A. Stroud and Dexter J. Booth
448 pages, Illustrated, 7 x 10
Published: March, 2005
ISBN (0-8311-)3208-6

Vector Analysis CD-ROM 
$36.95
K.A. Stroud and Dexter J. Booth
448 pages, Illustrated,
Published: May, 2005
ISBN (0-8311-)3251-5

Vector Analysis, Book and eBook Combo 
$55.50
K.A. Stroud and Dexter J. Booth
448 pages, Illustrated, 7 x 10
Published: May, 2005
ISBN (0-8311-)3252-3

Welded Joint Design, Third Edition 
$49.95
John Hicks
176 pages, Illustrated, 6 x 9
Published: February, 2000
ISBN (0-8311-)3130-6

Welding and Cutting: A Guide to Fusion Welding and Associated Cutting Processes 
$43.50
Peter Houldcroft and Robert John
240 pages, Illustrated, 6 x 9
Published: January, 1989
ISBN (0-8311-)1184-4

Welding Essentials: Questions and Answers, Expanded First Edition 
$34.95
William L. Galvery, Jr. & Frank B. Marlow
480 pages, Illustrated, 7 x 10
Published: July, 2001
ISBN (0-8311-)3151-9

Welding Fabrication and Repair: Questions & Answers 
$34.95
Frank Marlow
320 pages, Illustrated, 6 x 9
Published: July, 2002
ISBN (0-8311-)3155-1

Welding, A Management Primer and Employee Training Guide 
$39.95
Robert O'Con
208 pages, Illustrated, 7 x 10
Published: July, 2000
ISBN (0-8311-)3139-X

Why Systems Fail: And How to Make Sure Yours Doesn't 
$42.95 $21.50
David A. Turbide
224 pages, Illustrated, 6 x 9
Published: January, 1996
ISBN (0-8311-)3059-8